Air depuration

Product list

Air is a mixture of odourless gases

Human life and the life of our planet Earth have constructed an equilibrium with the surrounding air and have always managed to keep the natural causes of pollution under control. However, business and industrial development have led to pollution of our atmosphere with disastrous consequences for mankind, present, and in the near future. Keeping gaseous emissions in check represents accepting responsibility for this problem. Society must spread awareness in regards to pollution and the importance of avoiding or limiting its causes. By respecting the limits of concentration of pollutants, good air quality and the safeguard of public health can be guaranteed.

The use of activated carbons to restore a broken equilibrium

The technology of adsorption is based on the ability of activated carbon in handling Volatile Organic Compounds. Industries have used activated carbon for years to improve air quality in the following applications:

  • Removal/recovery of solvents or solvent mixtures
  • Purification of air effluent from industrial processes
  • Separation of gas mixtures
  • Purification of natural gas and synthetic gases
  • Removal of oil vapours from compressed air
  • Deodorization of exhaust air or flue gas
  • Removal of harmful substances in air conditioning systems.

The efficiency of an activated carbon depends on numerous factors like temperature, relative humidity, length of contact, velocity and distribution of air through the carbon bed, nature and concentration of contaminants.

The following list facilitates the identification of the adsorption level of various chemical substances in our activated carbon product line for air.

The numbers from 1 to 4 next to each substance signify:
1 = excellent adsorption, approximately 30% in weight
2 = good adsorption, approximately 15% in weight
3 = poor adsorption, usually less than 5% in weight
4 = adsorption is not perceptible.

List of the adsorption capacity of some substances in their gaseous phase on activated carbon:

2-Chloroethanol1 Dichloroethane1 Methyl alcohol2
Acetaldehyde3 Dichloroethylene1 Methyl bromide2
Acetic acid1 Dichloroethyl ether1 Methylbutylketone1
Acetic anhydride1 Dichloromonofluoromethane2 Methylcellosolve1
Acetylene4 Dichloronitroethane1 Methylcellosolve acetate1
Acrolein2 Dichloropropane1 Methyl chloride3
Acrylic acid1 Dichlorotetrafluoroethane2 Methyl chloroform1
Acrylonitrile1 Diethylamine2 Methylcyclohexane1
Adhesives1 Diethylketone1 Methylcyclohexanone1
Amines3 Dimethylaniline1 Methylene chloride1
Ammonia3 Dimethylsulfate1 Methyl ether2
Amyl acetate1 Dioxane1 Methylethylketone1
Amyl alcohol1 Dipropylketone1 Methylisobutylketone1
Amyl ether1 Disinfectants1 Methylmercaptan1
Anesthetics2 Essential oils1 Monofluorotrichloromethane2
Aniline1 Ethane4 Naphtalene1
Animal odours2 Ether2 Nicotine1
Antiseptics1 Ethyl acetate1 Nitric acid2
Aromatic foods1 Ethyl acrylate1 Nitrobenzenes1
Bacteria2 Ethylamine2 Nitroethane1
Benzene1 Ethylbenzene1 Nitrogen dioxide3
Benzine1 Ethyl bromide2 Nitroglycerine1
Bromine1 Ethyl chloride2 Nitromethane1
Butadiene2 Ethylene4 Nitropropane1
Butane3 Ethylene oxide1 Nitrotoluene1
Butanone3 Ethyl ether2 Nonane1
Butene3 Ethylmercaptan1 Octane1
Butyl acetate1 Eucalyptol1 Ozone1
Butyl alcohol1 Fish odours1 Paint odours1
Butyl aldehyde2 Fluorotrichloromethane2 Palmitic acid1
Butylcellosolve1 Formaldehyde3 Pentane1
Butyl chloride1 Formic acid2 Pentanone2
Butylene3 Fragrances1 Pentene1
Butyl ether1 Freon2 Perchloroethylene2
Butyric acid1 Heptane1 Phenol1
Camphor1 Heptene1 Phosgene2
Caprylic acid1 Hexane2 Propane1
Carbon dioxide4 Hexylene2 Proprionic acid1
Carbon disulfide1 Hydriodic acid3 Propyl acetate1
Carbon monoxide4 Hydrobromic acid3 Propyl alcohol1
Carbon tetrachloride1 Hydrochloric acid3 Propyl chloride1
Cellosolve1 Hydrocyanic acid3 Propylene3
Cellosolve acetate1 Hydrofluoric acid3 Propyl ether1
Chlorine3 Hydrogen4 Propylmercaptan3
Chlorobenzene1 Hydrogen sulfide3 Putrescine1
Chlorobutadiene1 Hydrogen sulfide3 Pyridine1
Chloroform1 Incense1 Resins1
Chloronitropropane1 Indol1 Styrene3
Chloropicrin1 Iodine1 Sulfur dioxide3
Cigarette smoke1 Iodoform1 Sulfuric acid1
Cooking odours1 Isoprene2 Sulfur trioxide3
Corrosive gases3 Isopropyl acetate1 Tetrachloroethane1
Creosol1 Isopropyl alcohol1 Tetrachloroethylene1
Creosote1 Isopropyl ether1 Toluene1
Crotonic aldehyde1 Kerosene1 Toluidine1
Cyclohexane1 Lactic acid1 Trichloroethylene1
Cyclohexanol1 Liquid fuels1 Urea1
Cyclohexanone1 Lubricant oils and fats1 Uric acid1
Cyclohexene1 Medicinal odours1 Valeric acid1
Decane1 Menthol1 Valeric aldehyde1
Decomposition odours1 Mercaptans1 Vinyl chloride2
Deodorants1 Mesytil oxide2 Viruses1
Detergents1 Methane4 Xylene2
Dichlorobenzene1 Methyl acetate2
Dichlorodifluoromethane2 Methyl acrylate1

Flue gas purification

Product list

Purification of flue gas from incineration

Powdered activated carbon is used to remove dioxins, furans, and mercury from flue gases.

The degree of adsorption of these pollutants depends upon:

  • the raw material from which the activated carbon is obtained
  • the degree of activity of the activated carbon
  • various physical parameters of the activated carbon
  • the method with which the activated carbon is used in an installation

The activated carbons used in this application can be of vegetable matter (coconut, wood, etc.) or mineral matter (lignite, bituminous coal, peat, anthracite, etc.).

The degree of activity calculated analytically by the "Iodine Number" and the "Active Surface Area" is without doubt, very important. In fact, the higher these values are, the better the adsorption performance of an activated carbon is. However, it must be taken into account, that often, in this application, due to a very short contact time between the flue gas and the powdered activated carbon, a high "Active Surface Area" (greater than 600 to 700 m²/g) is not utilized to its best extent.

Physical parameters must not be disregarded either, like the granulometric distribution and the ash content. Of the two, the granulometric distribution is certainly the most important as the capture of dioxins, furans and mercury is achieved through adsorption kinetics, i.e. the flue gas passes through a cloud of powdered activated carbon which has been injected into a reactor or into a conduit for the passage of the flue gas. The finer the grain size, the more compact and suspended the cloud remains and the greater the probability of contact with the particles of the pollutants. We advise using powdered activated carbon with an average grain size of 20 to 25 microns and a maximum grain size of 100 to 150 microns.

Water treatment

Product list

Adsorption is widely used in the treatment of water and activated carbon is the most widely used adsorbent for the removal of numerous organic contaminants. In the last few years, the technology pertaining to its use has widely developed, basically in the following applications:

Drinking Water Treatment

  • Dechlorination
  • Elimination of unpleasant tastes and odours
  • Adsorption of pesticides and triazines
  • Removal of hydrocarbon chlorides
  • Adsorption of surfactants
  • Emergency situations of accidental pollution

Wastewater Treatment

  • Elimination of toxic compounds
  • Lowering COD (chemical oxygen demand) to regulation level
  • Removal of colour and odours
  • Avoiding the formation of foam
  • Favouring the conditioning of sludge in biological treatment plants
  • Treatments of dechlorination and deozonization
  • Filtration of swimming pool and aquarium water

When there are combined needs where quantities of activated carbon can vary greatly, a precise diagnosis is necessary to discover what can be reasonably obtained from the activated carbon used and the means to achieve the desired objective.

It should be pointed out that an activated carbon made up of solely one kind of porous structure does not exist. Different raw materials and their thermal or chemical activation can only lead to a porous structure where a certain type of porosity is dominant. Macro, meso and micropores are all present in carbon and can cause a phenomenon of molecular sieving that influences the selection of a particular activated carbon over another and the type of process to be used, given the competitiveness that exists between the different molecules to be adsorbed.

Microscopic algae and humic acids respond preferably to macropores and a portion of mesopores.

Dyes and tannins are adsorbed mainly by mesopores.

Microporosity is determinant for the adsorption of detergents, chlorophenols, halogenated hydrocarbons, triazines, etc.

Decolourization of liquid foods

Product list

Food and health are foremost in Man's thoughts and a means of improving his quality of life

Decolourization is almost exclusive to chemical-pharmaceutical industries and to agro-food industries.

Bleaching activated carbon can be used in the following industrial applications:

  • decolourization of wine
  • decolourization of fruit juices
  • decolourization and purification of glucose
  • decolourization and purification of oils and fats
  • decolourization and purification of chemical-pharmaceutical products

Activated carbon guarantees the possibility of obtaining a final product of pure, constant, and high-performing quality. In the last ten years, the technology regarding activated carbons has made great progress primarily in two directions: improvement in quality and more rational technologies of use with regard to the quality of carbon.

The activity level of activated carbon chosen is very important because depending on the dosage needed, it can weigh heavily on the overall cost, especially when there are costs of handling, filtering, and eliminating sludge.

Before evaluating the adsorbent properties of an activated carbon, we must be sure that it is not a vehicle for impurities capable of interfering with the products to be treated.

Before evaluating the adsorbent properties of an activated carbon, we must be sure that it is not a vehicle for impurities capable of interfering with the products to be treated.

Activated carbons guarantee quality and constancy of the final product

To determine the decolourizing power of activated carbons, among the multitude of testing methods that exist, we would like to point out the following:

Methylene blue index
This establishes how much solution of blue methylene at 0.15% can be decoloured by 100 mg of activated carbon (dry substance) in 5 minutes.

Molasses number
This test has been adopted by manufacturers of activated carbon as the standard method with which the degree of decolourization (decolourizing performance) is measured.

Principle

The decolourization of a standardized molasses solution with activated carbons is compared colourimetrically to the decolourization of a standard carbon (measurements of photoelectric extinction). With this method, the decolourization performance of different types of activated carbon can be established. Under conditions reflecting reality, the quantity of each type of activated carbon needed to obtain an equal degree of decolourization can be recorded systematically.

Execution
Different quantities of activated carbon - for example 100, 300, 500, 700 mg - are put into glasses and mixed with 100 ml of the solution to be treated. The solution is brought to 80°C or to an actual temperature of operation. For each type of activated carbon tested, 1 litre of the solution to be treated will also be prepared with a sample without activated carbon and will serve as a control sample. It will undergo the same set of tests and be measured optically. On the basis of similar preliminary tests previously held, it would be best to calculate the amount of activated carbon needed to carry out the tests.

Decolourization
The samples are treated bain-marie at the aforementioned temperatures and are agitated at brief intervals. After approximately 30 minutes, adsorption equilibrium will have been established.

Filtration
Subsequently, the activated carbon is filtered repeatedly until the liquid becomes clear. When necessary, filtering adjuvants are added; for example fossil flour. The clear, filtered liquid is then cooled and brought to room temperature.

Colourimetry
There is a colourimetric comparison between the control solution and the samples tested. A series of measurements is obtained.

From the quantitative relationship resulting between two activated carbons, it is possible to reliably compare cost versus efficiency and therefore, evaluate which types of activated carbon are more inexpensive to use.

Decolourization and purification of oils and fats

Product list

Decolourization and purification of oils and fats with activated bleaching earths and carbon

Oils and vegetable fats contain colours and impurities deriving from carotenoids, chlorophyll, oxidations, etc., which must be removed in order to obtain a high quality final product. Activated bleaching earths remove undesired colours and other impurities like soaps, phospholipids, oxidation from metals, improving the appearance and taste of the final product. Activated carbon, on the other hand, has a dual function: in addition to removing undesired colours, it can adsorb Polycyclic Aromatic Hydrocarbons (PAH).

Carbonitalia handles activated bleaching earth and trades in the entire Mediterranean area. Carbonitalia activated bleaching earth is obtained from Bentonite and Montmorillonite. Carbonitalia monitors the entire manufacturing process with special attention in order to guarantee a final product with a constant quality. This includes the process of activation with sulfuric acid, the washing process, the drying process, and checking the granulometry. The activated earths produced have a high "Active Surface Area" and porosity in order to obtain a correct decolourization and filtration velocity for the majority of oils and fats.

Carbonitalia's bleaching earths have been especially developed to supply both a high- performing and low- dosage product for the customer. Carbonitalia offers on the market a variety of bleaching earths with different activity levels and granulometric distributions to suit different filtration systems and to minimize retention of oils in the earth residue.

Carbonitalia also supplies activated earths with different degrees of acidity in order to obtain, when necessary, a lower residual acidity in the final product when freed fatty acids must be reduced, and a higher residual acidity for those applications when catalytic properties are needed because of an acidic surface.

Bleaching earths can be supplied as follows: packed in small bags stacked on pallets, large bags on pallets, or in bulk by tank truck/trailer.

At the Carbonitalia plant in La Spezia, bleaching earths can be mixed with powdered activated carbon of a high activity level, specially studied for the removal of Polycyclic Aromatic Hydrocarbons from food oils. Bleaching earths and activated carbon can also be mixed at different percentage rates as per customer request in order to obtain a homogenous final product.

Catalysis and chemisorption

Product list

Activated carbon catalyzes some reactions directly. For this use, porosity and surface area are essential factors and must be chosen in function of the reaction to be catalyzed. The powdered or granular activated carbon can be adapted to the reactant where the catalysis will take place, depending on the system to be employed (fixed, mobile, or fluid bed).

Catalytic power exerts itself in a large number of reactions of isomerisation, polymerization, oxidation, halogenation. Activated carbon can also be used as a catalytic support, thanks to its large surface area. Its chemical inertia and its resistance to high temperatures make this particular use even more appealing.

When activated carbon is impregnated with metals, oxides or various metallic salts, it becomes a catalyst that does not agglomerate and that opposes itself to a too rapid volatilization of the impregnant. In some cases, it acts as a promoter, increasing the reaction rate and allows operation at lower temperatures, if necessary.

The development of catalytic processes in chemical industries has increased the interest for activated carbons in this field of application.

certificazione 9001:2015 certificazione 14001:2015 certificazione 22000:2005

  • Sede Legale: Scali D'Azeglio 32 - 57123 Livorno (LI) - Tel: +39 0586 27333 Fax: +39 0586 273370
  • Sede Operativa e Magazzino: Via Emanueli snc - 19020 Vezzano Ligure (SP) - Tel: +39 0187 991007 Fax: +39 0187 991203